ATI super damper installation kit BMW M52TU S52US M54 without trigger wheel

Description

BMW M52TU/S52US/M54 engine ATI super damper installation kit
without trigger wheel
If you're building a serious M52TU/S52US/M54 engine, here's a proper solution to replace the old cranky damper wheel! No more broken harmonic balancers, loosen up crankshaft bolt or oil pump issues. ATI dampers are rebuildable and can be tuned with different hardness o-rings.
M50, M52, S52 Vanos with trigger wheel:
https://www.ebay.com/itm/254199055308
The kit consists:
CrMo tool steel crankshaft hub to be used with ATI super damper
Mounting hardware
ATI DAMPER SHOWN IN THE PICTURES
NOT INCLUDED
A/C pulley not compatible with the kit
The hub is recommended to be used with 6.78" diameter serpentine shell assembly
(ATI #917071, 2JZ)
Other variations can be used too,
-CS
stands for countersunk bolts
(add note to seller if needed)
, number after the part no. 917071
-XX
stands for o-ring hardness, standard is
60.
Longer 6PK1600 belt needed (6rib 1600mm)!
Balancing the assembly is highly recommended.
Honing of the center bore might be required, refer to ATI super damper instructions.
Use ATI torque rates and locktite on every bolt!
We're using DHL Express shipping, item tracking can be found here:
https://www.dhl.com/en/express.html